|
Gardner Bender PSW-1600T Cable Staple, 3/16 in W Crown, Polyethylene
PRODUCT OVERVIEW
The Gardner Bender 3/16 in white polyethylene low-volt staples secure bell, speaker, thermostat and telephone wire. These staples feature UV-resistant polyethylene saddles for excellent resistance to rust, rot and deterioration. The zinc-plated nails resist rust and corrosion, making this staple ideal for both indoor and outdoor applications and with only one nail per staple installation is quick and easy.
Product Details
Color:White
Crown Width:3/16 in
Material:Polyethylene
Type:Low-Voltage
Features
For securing speaker, telephone, bell and other low-volt wire
UV-resistant polyethylene saddle resilient against cracks and other deterioration
Zinc-plated nails resist rust and corrosion
Drives in with a hammer
1 nail per staple for quick and easy installation
View Details
|
6117352 |
Gardner Bender PSW-1600T Cable Staple, 3/16 in W Crown, Polyethylene |
5 |
2.39 |
/ PK |
PSW-1600T |
|
|
Gardner Bender PSW-165 Staple, 1/4 in W Crown, 15/16 in L Leg, Polyethylene
PRODUCT OVERVIEW
Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products.
Product Details
Color:White
Crown Width:1/4 in
Leg Length:15/16 in
Material:Polyethylene
Type:Coaxial
Features
This staple secures RG-59 and RG-6 coaxial cables
UV-resistant polyethylene saddle will not rust, crack or deteriorate
Drive in with a hammer
1 nail per staple for quick and easy installation
View Details
|
6155758 |
Gardner Bender PSW-165 Staple, 1/4 in W Crown, 15/16 in L Leg, Polyethylene |
2 |
4.29 |
/ PK |
PSW-165 |
|
|
Gardner Bender PS-75 Cable Staple, 3/4 in W Crown, 1-1/4 in L Leg, Plastic/Polyethylene, 50/PK
PRODUCT OVERVIEW
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
Product Details
Color:White
Crown Width:3/4 in
Leg Length:1-1/4 in
Material:Plastic/Polyethylene
Type:Insulated
Features
Polyethylene saddles will not rust, rot or deteriorate
Fast and easy installation
Nail heads are recessed for minimum exposure
UV-resistant polyethylene saddle resilient against cracks and other deterioration
Zinc-plated nails resist rust and corrosion
This staple secures NM, UF and other types of non-metallic cable
View Details
|
6270490 |
Gardner Bender PS-75 Cable Staple, 3/4 in W Crown, 1-1/4 in L Leg, Plastic/Polyethylene, 50/PK |
Discontinued |
3.99 |
/ PK |
PS-75 |
|
|
Gardner Bender PS-50 Cable Staple, 1/2 in W Crown, 1-1/4 in L Leg
PRODUCT OVERVIEW
For metallic and non-metallic cording and cable. Easy to install, drive both zinc-plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8 in width) prevents damage to insulation. High-grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature, non-conductive for safe and secure cable fastening.
Product Details
Color:White
Crown Width:1/2 in
Leg Length:1-1/4 in
Material:Plastic/Polyethylene
Type:Insulated
Features
Polyethylene saddles will not rust, rot or deteriorate
Zinc-plated nails resist rust and corrosion
Fast and easy installation
Nail heads are recessed for minimum exposure
This staple secures NM, UF and other types of non-metallic cable
View Details
|
6270516 |
Gardner Bender PS-50 Cable Staple, 1/2 in W Crown, 1-1/4 in L Leg |
2 |
3.79 |
/ PK |
PS-50 |
|
|
Gardner Bender WireGard GB-1 Series 19-001 Wire Connector, Gray, 22 to 16 AWG Wire, Steel Contact, 1
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
Product Details
Color:Gray
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Polypropylene
Length:21/64 in
Mounting Type:Screw
Voltage Rating:300 V
Width:21/64 in
Wire Size:22 to 16 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308654 |
Gardner Bender WireGard GB-1 Series 19-001 Wire Connector, Gray, 22 to 16 AWG Wire, Steel Contact, 1 |
2 |
1.99 |
/ EA |
19-001 |
|
|
Gardner Bender WireGard GB-2 19-002 Wire Connector, 22 to 16 AWG Wire, Steel Contact, Blue, 14/CD
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
Product Details
Color:Blue
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Thermoplastic
Length:25/64 in
Mounting Type:Screw
Voltage Rating:300 V
Width:25/64 in
Wire Size:22 to 16 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308696 |
Gardner Bender WireGard GB-2 19-002 Wire Connector, 22 to 16 AWG Wire, Steel Contact, Blue, 14/CD |
6 |
1.99 |
/ EA |
19-002 |
|
|
Gardner Bender WireGard GB-3 19-003 Wire Connector, 22 to 14 AWG Wire, Steel Contact, Orange, 10/CD
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
Product Details
Color:Orange
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Thermoplastic
Length:7/16 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:7/16 in
Wire Size:22 to 14 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308753 |
Gardner Bender WireGard GB-3 19-003 Wire Connector, 22 to 14 AWG Wire, Steel Contact, Orange, 10/CD |
3 |
1.99 |
/ EA |
19-003 |
|
|
Gardner Bender WireGard GB-4 19-004 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Yellow, 9/CD
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
Product Details
Color:Yellow
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Thermoplastic
Length:35/64 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:35/64 in
Wire Size:18 to 10 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308845 |
Gardner Bender WireGard GB-4 19-004 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Yellow, 9/CD |
6 |
1.99 |
/ EA |
19-004 |
|
|
Gardner Bender WireGard GB-4 19-006 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Red, 6/CD
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 221 deg F. Color coded for quick and easy size selection.
Product Details
Color:Red
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Thermoplastic
Length:21/32 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:21/32 in
Wire Size:18 to 10 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308852 |
Gardner Bender WireGard GB-4 19-006 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Red, 6/CD |
1 |
1.99 |
/ EA |
19-006 |
|
|
Gardner Bender WireGard GB-1 Series 25-001 Wire Connector, Gray, 22 to 16 AWG Wire, Steel Contact, 2
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
Product Details
Color:Gray
Contact Coating:Zinc
Contact Material:Steel
Height:4.13 in
Housing Material:Polypropylene
Length:21/64 in
Mounting Type:Screw
Voltage Rating:300 V
Width:21/64 in
Wire Size:22 to 16 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308886 |
Gardner Bender WireGard GB-1 Series 25-001 Wire Connector, Gray, 22 to 16 AWG Wire, Steel Contact, 2 |
3 |
3.49 |
/ PK |
25-001 |
|
|
Gardner Bender WireGard GB-2 Series 25-002 Wire Connector, Blue, 22 to 16 AWG Wire, Steel Contact, 2
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
Product Details
Color:Blue
Contact Coating:Zinc
Contact Material:Steel
Height:4.25 in
Housing Material:Polypropylene
Length:25/64 in
Mounting Type:Screw
Voltage Rating:300 V
Width:25/64 in
Wire Size:22 to 16 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308902 |
Gardner Bender WireGard GB-2 Series 25-002 Wire Connector, Blue, 22 to 16 AWG Wire, Steel Contact, 2 |
3 |
3.49 |
/ PK |
25-002 |
|
|
Gardner Bender WireGard GB-3 Series 25-003 Wire Connector, Orange, 22 to 14 AWG Wire, Steel Contact,
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
Product Details
Color:Orange
Contact Coating:Zinc
Contact Material:Steel
Height:4.25 in
Housing Material:Polypropylene
Length:7/16 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:7/16 in
Wire Size:22 to 14 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6308985 |
Gardner Bender WireGard GB-3 Series 25-003 Wire Connector, Orange, 22 to 14 AWG Wire, Steel Contact, |
3 |
3.79 |
/ PK |
25-003 |
|
|
Gardner Bender WireGard 25-006 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Polypropylene Housi
PRODUCT OVERVIEW
WireGard(TM) twist-on wire connectors are designed for general-purpose applications requiring the connection of 2 or more copper wires. WireGard(TM) connectors feature a straight type polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all-purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric shell also features a deep skirt design to prevent exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 deg C. Color coded for quick and easy size selection.
Product Details
Color:Red
Contact Coating:Zinc
Contact Material:Steel
Height:4.13 in
Housing Material:Polypropylene
Length:21/32 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:21/32 in
Wire Size:18 to 10 AWG
Features
Designed to require fewer turns to reach required torque and meet or exceed UL pull out and dielectric test requirements
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6309124 |
Gardner Bender WireGard 25-006 Wire Connector, 18 to 10 AWG Wire, Steel Contact, Polypropylene Housi |
1 |
6.49 |
/ PK |
25-006 |
|
|
Gardner Bender WingGard 19-084 Wire Connector, Yellow, 22 to 10 AWG Wire, Steel Contact, Thermoplast
PRODUCT OVERVIEW
GB's WingGard(TM) twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
Product Details
Color:Yellow
Contact Coating:Zinc
Contact Material:Steel
Height:5.38 in
Housing Material:Thermoplastic
Length:1-1/32 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:23/32 in
Wire Size:22 to 10 AWG
Features
Wings are knurled for a sure grip and offset from centerline for greater twisting leverage
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6309132 |
Gardner Bender WingGard 19-084 Wire Connector, Yellow, 22 to 10 AWG Wire, Steel Contact, Thermoplast |
2 |
1.99 |
/ EA |
19-084 |
|
|
Gardner Bender WingGard 19-086 Wire Connector, Red, 22 to 6 AWG Wire, Steel Contact, Thermoplastic H
PRODUCT OVERVIEW
GB's WingGard(TM) twist-on wire connectors offer unsurpassed quality and durability in a high-leverage, easy-on, wing-type design. These hardworking connectors offer a wide range of connection options essentially ensuring that one size can do the job of multiple standard connectors. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force.
Product Details
Color:Red
Contact Coating:Zinc
Contact Material:Steel
Height:5.5 in
Housing Material:Thermoplastic
Length:1-1/4 in
Mounting Type:Screw
Voltage Rating:300/600 V
Width:29/32 in
Wire Size:22 to 6 AWG
Features
Wings are knurled for a sure grip and offset from centerline for greater twisting leverage
Square-wire zinc-plated spring instantly adjusts to the shape and size of the splice
Flame-retardant properties resist heat distortion up to 221 deg F High-dielectric shell features deep skirt design to prevent exposure of bare wire
Rated at 600 V max in building wire and at 1000 V max in lighting, fixtures/luminaries and signs
Copper to copper connections only
View Details
|
6309157 |
Gardner Bender WingGard 19-086 Wire Connector, Red, 22 to 6 AWG Wire, Steel Contact, Thermoplastic H |
2 |
1.99 |
/ EA |
19-086 |
|
